Posts
Update Bios
When new hardware components are not functioning properly, do check the BIOS to make sure the PC mendeteksinya appropriately. If there is a problem, try to overcome them to update the BIOS.
ATTENTION! : Update the BIOS is not without risk. Had failed, the PC can not distart. I will show how a general who works on most PCs. However, you need to seek information from the motherboard manufacturer. It may provide a more secure solution for your board.
Collecting information: Before you can update the BIOS, the exact name of your motherboard, including the version number and revision. On the PC "false" rather difficult, because usually use cheap clones of famous and the motherboard of course not listed in the guidebook. In addition, the BIOS manufacturer needed a name and number I
The fastest way to get more information by visiting the website is www.wimsbios.com. There, click on "Scan BIOS Update." On the next page, click again on the same key and install the plugin "Driver Agent" offered to Internet Explorer or Firefox. Now read the info.
When back in the "motherboard" noted the strange things, such as "System Product Name", it is likely a product of "false". In this case, Wimsbios back to the website and click on the "Manufacturer". With the help of the BIOS ID, can be the motherboard manufacturer. AMI BIOS-Example: to summarize the number-3 in the BIOS ID show producer. For other versions of the BIOS prosedunnya almost identical.
Make a boot disk: Right-click on the floppy drive. Through the "Format | Create MS-DOS startup" create a boot diskette to run the PC during a flash BIOS.
NOTE: If your PC does not have a floppy drive, the process is rather difficult. ASUS for example, offers an online update the BIOS. When the update process to make the Internet connection is lost, your BIOS is broken. Another possibility is burning utility flash on a CD. However, because of dangerous and less practical, I suggest to install a floppy drive in your PC.
Preparation update: In a simple principle applies here. For the full PC manufacturers such as Dell and others, and update the BIOS flash utility is available at their website. In the assembled PC or when the PC manufacturer does not provide support, get the BIOS from the motherboard manufacturer. With the information obtained beforehand, you can select the appropriate BIOS. And update the BIOS flash utility is usually available as a ZIP file. Extracting the boot diskette.
NOTE: If the manufacturer does not offer the flash program, as an alternative use UniFlash. Through the "Supported Hardware" in www.uniflash.org / hardware.htm, you can know whether your motherboard has supported.
Membackup old BIOS: Restart your PC and specify the floppy drive as the "First Boot Device." On this occasion, record all your BIOS settings because the update process will remove them. Step overclocking should you cancel for security reasons. The fastest way is with the BIOS, such as "Load setup defaults."
Now, start the PC from the floppy disks and flash utility show. Most utility automatically flash mem-long backup of the BIOS. Some (UniFlash) to start additional parameters, such as "save".
Flash BIOS: Replace the old version with the new BIOS. If not happen automatically, required a start parameter. UniFlash offers several parameters at once. For example, the parameters "E" for the flash and without comment "AMI" to display the correct settings for the AMI-BIOS. All the parameters available in UniFlash www.rainbowsoftware.org / uniflash.txt. Once the process is complete, restart the PC and set back the hard disk as the "First Boot Device." If there is not successful, do not occasionally turn your PC! Make or update again if there is an error report, restore the old BIOS.
The ....!!!!
